Products catalog

Compact incinerator is suitable for house hold waste and can burn silver-gold paper Sizing: 20 - 50 kg/hr. Characteristic: Compact incinerator has one chamber with 2 gates, upper gate for wet waste feeding, and lower gate for dry waste feeding. It consumes low fuel and electricity, safe, and easily...

Multipurpose electrical oven is for metal coating and ceramic industry. Heater can provide maximum 1,300oC and be used both 220/380 Volt. Its capacity is from 20 liter to 3 m3 and its internal structure is light brick coated with ceramic fiber. The incinerator is controlled by Digital Temperature...

Low cost incinerator has 2 chambers. The first chamber has better air supply system for provide suitable condition for combustion, and second chamber is combination of smoke combustion chamber and cyclone. Incinerator gate is designed to labor-saving and prevent the explosion in the chamber. So...

Incline rubber belt conveyor uses staircase rubber with thickness not less than 6 mm. to line the waste to waste separation system. The angle of incline conveyor is approximately 22 degrees, and width of belt is 0.6-1.0 m. in approximately. The length depends on the distance and height of the...

Hi-Electric oven, TEV - 1800, is designed for drying material, sample both matel and non-matel. Maximum temperature is about 1,800oC, its coil is made of MOSI2 which can resist up to 1,900oC. The oven controls by micro-controller and internal insulation can resist heat in particular. Moreover, the...

Dryer is designed to heat a shredded plastic to dry. The drying temperature is approximately 70oC, the drying hot air, the combination of external air and hot gas from the chamber, is blown to rotating plastics inside the tank. The rotary cylinder tank is horizontal shape lying with the adjustable...

Deluxe incinerator is suitable for infectious, industrial, and pathological waste. Sizing: 150 - 1,250 kg/hr Characteristic: Deluxe incinerator has separately 2 chambers. The primary chamber is lower position of incinerator; it can provide temperature in range 600-850oC. and it's equipped with...

Condenser is equipment for heat exchange between volatile oil and water/air. The objective of this exchange is to refine the volatile oil. Condenser sufficiently provides a heat exchanger area to each size of Plastic waste to oil machine. In case of using water to exchange the heat, cooling tower...

Sizing: 1 hr/body (in approximately) characteristic: the cremator has 2 chambers, the first for body combustion which burning at 850oc and smoke combustion in second chamber at less 1,000oc with 1. 5 second resident time. This saving energy cremator is convenient for entering the body and...

Standard incinerator Standard incinerator is suitable for infectious, industrial, pathological, and municipal waste. Sizing: 50 - 300 kg/hr Characteristic: Standard incinerator has 3 parts, combustion chamber, smoke combustion chamber, and cyclone. All parts equipped in the compact rectangular...

Sizing: 500 - 5,000 kg/day Characteristic: Econ incinerator is designed for burning medium humid waste such as waste from school, village, and community. Electricity and fuel are no needed for this incinerator, it is simply use the natural wind for sucking outside air for combustion process and...

Therm Engineering designs, fabricate, and maintain the waste water treatment system from the small to large size (2-4,000 m3/day). Treated water will be BOD value lower 6 mg/L. Moreover, Therm Engineering has a project about Bio - GAS as well.